Download BMW E65/66 Interface Install Manual. There are star shape screws on upper part of the monitor. Using exclusive instrument,loosen the screws and remove the monitor.
Please be careful not to make scars on wood trim when pulling out the monitor. Sometimes it is not pulled out easily as the backside white connecter may be caught. Then lift up the dashboard slightly and it may be easily pulled out. There are two connecters on backside of the monitor. White one should be disassembled before the black one. Assembling order is the reverse of that of disassembling.
Warning!
Please be careful not to make scars on wood trim when pulling out the monitor. Sometimes it is not pulled out easily as the backside white connecter may be caught. Then lift up the dashboard slightly and it may be easily pulled out. There are two connecters on backside of the monitor. White one should be disassembled before the black one. Assembling order is the reverse of that of disassembling.
Warning!
- Before working, please make sure the vehicle power is off (please keep in mind when pulling out the key, only monitor supply would be off but whole vehicle power supply would be off 5 minutes later)
- Starting with separating of the monitor and the connecter removed in working may causes a error code. Do not start until the work is done.
- Please use appropriate measure of tools.
- Do not force excessively in assembling or disassembling, tightening or pulling.
- Using protecting clothe or taping around the working area, take care of scars.
- Please make sure to connect the power cable using a fuse when you use it with pulling out the power supply.
0 Response to "BMW E65/E66 INTERFACE INSTALL MANUAL"
Post a Comment