Remove fan, fan clutch, shroud, and radiator overflow tank. Replace the bolts to the water pump pulley. Rotate the water pump pulley to verify clearance of bolts to waterpump housing. Note: Save the screws and clip-on nuts from the top of the radiator channel and from the shroud.
Remove the clip-on nut from the top of the passenger side radiator channel. Place the clip-on nut on the bottom of the drivers side radiator channel. Use the original screws to mount the overflow tank bracket to the radiator. (see Diagram A)
Remove the 2 clip-on nuts from the original fan shroud, attach them to the holes on the overflow tank bracket provided in the kit. Use the original screws holding the overflow tank to the original shroud to attach the overflow tank to the new bracket. (see Diagram A)
here
Remove the clip-on nut from the top of the passenger side radiator channel. Place the clip-on nut on the bottom of the drivers side radiator channel. Use the original screws to mount the overflow tank bracket to the radiator. (see Diagram A)
Remove the 2 clip-on nuts from the original fan shroud, attach them to the holes on the overflow tank bracket provided in the kit. Use the original screws holding the overflow tank to the original shroud to attach the overflow tank to the new bracket. (see Diagram A)
here
0 Response to "BLACK MAGIC 175 FORD MUSTANG 5.0 INSTALLATION GUIDE"
Post a Comment