Remove the entire stock air inlet system from your Mustang by simply unclamping at the throttle body and removing the bolt attaching the air box to the inner fenderwell area. Disconnect all hoses, wiring, etc., and then pull upwards firmly on the airbox to disengage from the rubber grommet in the framerail. Note: Rubber grommets will sometimes stay attached to the bottom of the stock airbox, be sure to remove them and reinstall into the framerail.
Remove the mass-air sensor from the air filter box and attach to the new filter mount, using the supplied bolts and nuts, with the electrical plug portion at the top. Note: On most models the airbox will need to be disassembled in order to allow access to the mass-air flow sensor. The airbox will come apart approximately 3 inches down from where the throttle body inlet hose attaches to the airbox.
here
Remove the mass-air sensor from the air filter box and attach to the new filter mount, using the supplied bolts and nuts, with the electrical plug portion at the top. Note: On most models the airbox will need to be disassembled in order to allow access to the mass-air flow sensor. The airbox will come apart approximately 3 inches down from where the throttle body inlet hose attaches to the airbox.
here
0 Response to "BOMZ RACING FORD MUSTANG GT COLD AIR INTAKE INSTALLATION GUIDE"
Post a Comment