Inventory in Box: 2- extendmyseat brackets 4- black 3/8 x ¾’ stainless grade 8 bolts 1- M10 x 125 by 1.35” grade 8.8 bolt w/ washer What you will need for assembly: 1- socket wrench 1- 9/16 socket & 1 11/16 SOCKET 1- Metric 13 socket (Prius uses metric bolts however a 9/16 works) 1- 9/16 flat wrench 1- 3/32 allen wrench 1- protective eyewear Step 1- Remove the 2 Black extendmyseat brackets from the packaging and locate the 4 black 3/8” provided bolts.
Step 2- Go to your vehicle with a socket wrench, a 3.32 allen wrench and a 9/16 socket, eye protection and your keys. Remember to turn off your cabin lights. Step 3- Locate the 4 factory bolts that hold your drivers seat to the vehicle. Take your socket wrench and loosen the 4 factory bolts. (2 in the front and 2 behind your seat, go to rear seat to locate) Remove the 2 plastic guards to locate the 2 rear factory bolts. Remove the 4 factory bolts and set them aside
Step 4- Unplug the 3 factory cables plugged into your car seat under the front portion of the seat. No tools required. Remember to plug these back in after you have completed the install. Step 5- Remove your car seat carefully. (Approx weight is 25 pounds) Step 6- Place your factory seat on a bench or on the ground on a clean sheet, towel etc...(don’t want to et it dirty) Download free Toyota Prius GEN 2 PASSENGER Extender Install Guide pdf here
Step 2- Go to your vehicle with a socket wrench, a 3.32 allen wrench and a 9/16 socket, eye protection and your keys. Remember to turn off your cabin lights. Step 3- Locate the 4 factory bolts that hold your drivers seat to the vehicle. Take your socket wrench and loosen the 4 factory bolts. (2 in the front and 2 behind your seat, go to rear seat to locate) Remove the 2 plastic guards to locate the 2 rear factory bolts. Remove the 4 factory bolts and set them aside
Step 4- Unplug the 3 factory cables plugged into your car seat under the front portion of the seat. No tools required. Remember to plug these back in after you have completed the install. Step 5- Remove your car seat carefully. (Approx weight is 25 pounds) Step 6- Place your factory seat on a bench or on the ground on a clean sheet, towel etc...(don’t want to et it dirty) Download free Toyota Prius GEN 2 PASSENGER Extender Install Guide pdf here
0 Response to "Toyota Prius GEN 2 PASSENGER Extender Install Guide"
Post a Comment